top of page
NT1 copy.png

Part of Norwegian Technology

Operations%20Manager_edited.jpg

In 2020 Norwegian Technology AS acquired the remaining 50% of Stavanger Slop AS and renamed the company to Norwegian Waste to Energy AS (NW2E) to continue wastewater treatment at the plant in Mekjarvik outside Stavanger.
 

About us

NW2E receives and treats oily water and other contaminated wastewaters. The wastewater treatment plant is equipped with six tanks for a total capacity of 4.500 m3 and a modern biological treatment plant. Also other types of hazardous waste are treated.

NW2E holds all the required licenses issued by the Norwegian Environmental Agency, the Directorate for Civil Protection and Emergency Planning (DSB) and the County Department of Environmental Affairs and complies with the IMO Guidance for Port Reception Facilities and MARPOL 73/78 conventions.


Key service features are:

•   Approved for receiving oily flushing water
•   Biological treatment
•   Easy and direct access to the port jetty and the plant
•   Deep water harbor  (15m)
•   Pipelines to tank farms with 8 hooks on quay
•   Services for waste disposal, hazardous waste handling
    and gas testing
•   Certified “A class” facilities for the treatment of 7025
    Crude Oil/Condensates and 7165 Process water/Wash water


Services

Wastewater treatment
The water is treated in a biological treatment plant, where bacteria ingest the hydrocarbons dissolved in the water. Air, heat and nutrients are feed into the bioreactor to establish the favorable environment for bacteria. Dead bacteria turn into sludge, which can be discarded.

Oily water treatment
This waste has Waste Substance Number 7030 and can be divided into different types:

•   Oil emulsions, water slop (EWL 16 50 71)
•   Oil emulsions (stable) (EWL 13 08 02)
•   Oily waste (EWL 16 07 08)
•   Tanker Bottom Water (EWL 13 04 00)
•   Water slo (EWL 13 04 00)
This waste is not subject to ADR regulations.


Treatment of other hazardous waste
The hazardous waste regulation defines hazardous waste as ”the waste that cannot be handled together with municipal waste, because it can cause serious pollution or risk of injury to people and animals”.

Examples of hazardous waste: Chemicals, Paints, Varnishes and glues, Waste oil, Oilseed rags, filters etc., Aerosols, Pesticides, Packages with residual waste, Sealed double glazing with PCBs (1965 to 1975), Mercury Thermometers, Solvents as linseed oil, acetone, white-spirit, etc., WEEE, waste electrical and electronic equipment.


Treatment of water soluble solvents
NW2E handles also wastewater containing small amounts of methanol, ethanol, propanol and other water-soluble solvents. This type of waste is defined as organic solvents without halogen and Waste Substance Number 7042.


 

e-mail: ms@norwegiantech.com

Read more here
 

NW2E holds all the required licenses

HSE

Safety is integrated into all operations and safety procedures regulate most activities. In the case of activities with a high risk of injury to personell or the environment a risk accessment is carried out. Annual audits are conducted to maintain the most suitable level of quality and environmental performance

NT1 copy.png
bottom of page